Ruger Pistol Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
409 Posts
Discussion Starter #1
I've seen quite a few "gimmicks" come along for the Ruger Mark pistols that address a problem that doesn't really exist. Here's one of those:




This is obviously a stamped part, made from aluminum with a blind slot in it. What this part does, is prevent the hammer strut from becoming captured behind the lower pin for the longer leg of the sear spring.
I'll try making one and see if it can't be done for a much lower cost.
 
1 - 1 of 1 Posts
Top